TUTORIAL: How to Make Fabric Hexagons

I have recently made some items using some fabric hexagons and have had quite a bit of interest and great comments on them. I thought it would be nice to share a free tutorial on making fabric hexagons and how to connect them with you here as well. Here is my easy-to-follow tutorial for you!

Materials Needed: 

Some fabric scraps

Some thread

A hand-stitching needle

Some pins

A pair of scissors

A piece of paper with hexagon shapes on it (You can generally re-use these hexagon pieces. Especially some shopping catalogue pages cut into hexagon shapes work really well for this project)

* I have come up with some printable hexagon templates in five different sizes for you. Choose the size that you would like to work with and print it out. (I used 2.5 inch hexagons for this tutorial):

- 1, 1.5 and 2 inch hexagons
- 2.5 inch hexagons
- 3 inch hexagons

1. Cut out your hexagon shapes.

2. Cut a little hole in the middle of your hexagon shaped paper. To do that, you can just fold your hexagon in half and cut a triangular shape in the centre (when you open it, it becomes a little diamond shaped hole). 

3. Cut a fabric that is in the rough shape of a hexagon, a circle or a square that is approximately 1cm larger than the paper hexagon all around as seen in the picture below.

4. Place your paper on the wrong side (ie. the side that will stay under) of the fabric and place a pin in the middle (where the hole on the paper is). This step you may choose to skip but helps with stabilising the fabric when hand-stitching the corners.

5. Fold one side of the material down along the hexagon edge as seen in the picture below.

6. Now, fold the side next to it as well and make a sharp corner. Using your threaded needle, start stitching the corner. Repeat a few times and then make a knot. The idea is to attach the two sides that make a corner together.

7. Once you secure your first corner with 3-4 stitches and a knot, move on to the next corner with a basting stitch.

8. Continue with the other corners. Secure each corner until there is no loose side.

9. Make a few knots to finish it off at the end and cut your thread about half an inch/a centimeter away from where the last knot is. (To hide the thread, you can run a basting stitch half a centimeter or a centimeter away from the knot and then cut the thread)

10. Take the pin out.

11. Congratulations! Your first hexagon is complete!

12. Now, lets move on to connecting your multiple hexagons. Make many other hexes and decide how you want to arrange them. Depending on the arrangements, you will need to connect your hexagons.

13. To attach your little hexagons together, take two of them and hold them facing the right sides (right side refers to the side that has a print and will stay on top) together. Then, start stitching them together preferably with a coordinating thread. There are a few stitch types that can be used but I like the ladder stitch which gives it a neat look and is hidden. I also find this invisible type of stitch easy to work with too. The next two pictures explain how the ladder stitch works, however, if you need a bit more help, it is like this: you take your first stitch just under either one of the folds and travel it about quarter of an inch under the fold and then come out (in the picture below, I started with the pink polka dots fabric) and then across from where the first stitch came out on the other fabric, take another stitch, again just under the fold. You need to repeat this until the end)

14. At the end, secure your stitches with a few knots. I like to wrap my thread twice around my needle and pull it tight to make a knot and I do that a few times. The thread that I used in this tutorial is high quality and strength (that is why I didn't have the urge to double thread my needle). If your thread is not of the best quality, I would suggest you make sure to make a knot a few times before cutting your thread off or before moving on to stitching the other side of your hexagon.

15. This is how they look when attached. 

16. If you are going to make a flower with your hexes, then it is the time you need to take your third hexagon and connect it with the other two that you have just attached. In the picture below, my third hexagon is planned to be the centre of the flower and is yellow. Now, it needs to be attached to both the polka dots and the green fabrics.

17. I first stitched the pink polka dots fabric and the yellow hexagon together.

18. Then, I attached the other side of the yellow hexagon, which was facing the green hexagon, to the green hexagon. While doing that, I needed to bend the pink hexagon a bit, which is totally fine.

19. You need to repeat these last steps with the rest of the missing pieces of your project to complete your fabulous hexagon flower.

20. Once your project is complete, you can easily slip off the paper pieces from the fabric hexagons and you are done!

   

What you can do with your fabric hexagons is limited to your imagination. Have fun designing!